DOORFRAMER's Two-Piece Closure Bolt

Easy to install and remove!

Thumbwheel and wing nut type feature for easy manual tightening and removal

and

15 mm socket and slotted screwdriver feature for easy mechanical tightening and removal

This Two-piece Closure Bolt is for 2 3/8" and 2 3/ 4" backset doors with jambs up to 1 1/4H thick, right or left hand swing.  It can be used on interior doors and exterior doors to eliminate sag and to secure the door from manufacture through installation.

The Two-piece Closure requires a 1" diameter or a 3/4" X 1" rectangular hole through the jamb.  The two parts are supplied in a connected set to aid installation and ensure an equal number of matching parts supplied in each box.

* A unique ratcheting feature reduces  any chance of vibrating loose during shipment.

* The barrel section can be left  in place for alignment during  installation or during construction to  act  as a  temporary  latch until hardware  is installed.   The barrel can also be used to stabilize double and sidelight doors.

DOORFRAMER's Closure Clip

This one-piece low profile Closure Clip is for 2 3/411  Backset doors. Like other DOORFRAMER Closure Clips it's the easiest on the market to install and remove.  It can be used on exterior doors to reduce sag and maintain the door·s reveal all the way through installation.

DOORFRAMER's Closure Clip

This one-piece, low profile Closure Clip is for 2 3/8" Backset doors. Like other DOORFRAMER Closure Clips, it's the easiest on the market to install and remove.  It can be used on both interior doors and exterior doors to reduce sag and maintain the door's reveal - all the way through installation.

These clips do NOT require a complete bore through the jamb.

DOORFRAMER's DOUBLE DOOR/SIDELIGHT CLOSURE SYSTEM

The DDTl used alone or in conjunction with DOORFRAMER'S 1-Piece Closure Clip through the knob and bore holes is the perfect alternative to screwing through the head  jamb, sticks across the face, or other costly closures.

DOORFRAMER's Closure Clip

This one-piece Closure Clip is primarily for split jamb 2 3/8" backset doors and features a special slim profile above the jamb to allow for casings. This part can be easily removed at the job site by simply cutting along the casing and removing the staple.